Compatible models
Fuerte, Nové, Nové Nat, Ultra, Ultra Rond, Flater, Decor, Nature, Defence Plus, Pantah, and Tifon Swing Gates.
Technical specifications
| |
1 leaf |
2 leaves |
| Height |
2,00 m |
2,00 m |
| Width |
1,50 a 5,00 m |
3,00 a 9,50 m |
| Total width |
2.000 a 5.500 mm |
3.500 a 10.000 mm |
| Clear opening width |
1.490 a 4.990 mm |
2.990 a 9.470 mm |
| Post profile |
140x140 |
140x140 |
| Leaf section |
60x60 / 80x80 |
60x60 / 80x80 |
| Infill |
Depending on gate finish |
Depending on gate finish |
Potential entrapment due to the space occupied by the motors when opening must be accounted for. The total open width is variable.
Motorizations
Low-voltage electromechanical brushless gear motors (36 V motor, 230 V AC – 50 Hz mains power supply, 200 W), with opening and closing mechanical stops and digital encoder.
| |
BE20/400 |
SMARTY5R5 |
SMARTY7R |
| Max. leaf length |
4,00 m |
5,00 m |
7,00 m |
| Type |
Non-reversing |
Reversible |
Reversible |
| Duty |
Extra-intensive |
Extra-intensive |
Intensive |
| Thrust |
100 – 2.800 N |
600 – 6.500 N |
600 – 6.500 N |
| Speed |
1,66 cm/s |
1,8 cm/s |
1,6 cm/s |
| Opening time |
17 – 26 s |
20 – 40 s |
35 – 50 s |
| Recorrido |
550 mm |
370 mm |
520 mm |
| Stroke |
Digital sensorless 48 PPR |
Sensorless 48 PPR + EMA |
Sensorless 48 PPR + EMA |
| Protection |
n/d |
IP44 |
IP44 |
Included components:

|
Nº
|
Component
|
Type
|
|
1
|
Gate (leaf)
|
|
|
2
|
Lock
|
Control
|
|
3
|
Drop bolt and floor stop
|
Safety
|
|
4
|
Hinges
|
Guiding
|
|
5
|
Safety cable (sling)
|
Safety
|
|
6
|
Actuator and control panel
|
Control
|
|
7
|
Closing safety edge
|
Safety
|
|
8
|
Emergency stop
|
Safety
|
|
9
|
Indoor photocells
|
Safety
|
|
10
|
Outdoor photocells
|
Safety
|
|
11
|
Identification plate
|
Signaling
|
|
12
|
Flashing light
|
Signaling
|
Optional components
- Extra XP20 photocell set.
- Lock with release key.
- Stainless steel numeric code keypad.
- CDN compact resistive safety edge.
- Extra remote control (transmitter).
- Magnetic connection loop.
- 80x80 mm tubular post, 0.40 m height on base plate (for keypads).
- 120x120 mm tubular post, 1.20 m height, with access hatch (digicode).
- 100x100 mm tubular post, 3.00 m height, with hatch (camera, truck).
Approval and marking
Swing gates comply with standard UNE-EN 13241 (EN 13241-1:2003), which defines the safety and performance requirements for gates installed in areas accessible to people. Standard Rivisa gates passed the declaration of conformity testing and bear CE marking.